Wood Care Oil

Wood Care Oil

Wood Care Oil is specifically designed for the reconditioning and care of oiled furniture, stairs, wood, parquet and cork flooring. It is equally suitable for factory-oiled surfaces (preliminary test required). The wood care oil has both a regenerating and care effect, levels out smaller defects and gives the wood back its beauty and brilliance. It is anti-static and provides a reliable protection against water and dirt. It can be applied on the entire surface as well as partially. While OLI-NATURA Wood Care Oil ‘Nature’ is used for uncoloured oiled surfaces, OLI-NATURA Wood Care Oil ‘White’ is applied on white oiled ones.

Available in 1 Liter

Wood Care Oil

Depending on the area of application and absorptivity of the substrate: 10-20 g/sqm per application / 1 litre is sufficient for circa 50-100 sqm.

Processing recommendation:

 

  • Prior to any care measure we recommend dry cleaning and a wet cleaning with OLI-NATURA Wood Soap. Allow the surface to dry completely.
  • Shake container well before use.
  • Soak white pad or cotton cloth with Wood Care Oil and massage into the wood. Remove excess after max. 10 minutes with a dry cotton cloth. No excess oil should be left behind.
  • For large surfaces, apply wood care oil evenly and thinly with a sprayer or weasel, allow to work in for max. 10 minutes and polish in with a white pad by hand or polishing machine. Remove any excess oil with a cotton cloth.

 

Note: Cloths, pads or wood dust soaked with oil can spontaneously ignite due to heat build-up, therefore please clean immediately after use or store under water.

1 litre per coat is sufficient for 50-100 m

Let the impregnated surface dry for a minimum of 12 hours, preferably overnight. Do not wet wipe for the first few days. In the case of sensitive surfaces, test first on an inconspicuous area.

Unopened 36 months

Do not wet wipe for the first few days. In the case of sensitive surfaces, test first on an inconspicuous area.

Let the impregnated surface dry for a minimum of 12 hours, preferably overnight. Do not wet wipe for the first few days. In the case of sensitive surfaces, test first on an inconspicuous area.